Mini 6700 Quick Start Guide
How To Install the Sim Card
Your phone is a dual sim model. There are two sim slots are located  right next to each under the battery cover directly at the bottom of the phone – you may put your card in either slot. Please make sure you insert your sim card facing down with the gold contacts properly aligned.

Battery
Install your battery making sure the gold contacts are lined up.

How To Adjust the Backlight
You can adjust the backlight on your phone by going to the main menu page and choosing “Settings”. From here, scroll down and choose “Phone setup” and then “Backlight time” - you will be able to adjust both the timer and brightness. 89

Power on
Power on your phone by holding down the red button located directly under the “FM” key.  AT&T or T-mobile should appear on the top of your screen within seconds of powering on. If they don't then your sim card is in wrong.
Unlocking the Phone
If you have the auto keypad lock enabled, simply press the “ – “ button followed by the “ * “ button to unlock the keypad.

Auto Update of Date & Time
The phone will constantly ask you if you automatically want to adjust the date and time. To turn this feature off, go to the main menu and choose “Settings”. From here, go to “Phone Setup” and then scroll down to “Auto Update of Date & Time” and make sure it is off.

Motion Sensors
The wallpaper/background of the phone will randomly change and also make unique noise whenever it changes. You can adjust this by turning the motion sensors either on or off by going to the main menu and choosing “settings”. From here, choose “Phone setup” and then scroll down to “Motion Sense Setting”

Phone book
Enter any phone number you wish to use in the phone book by going to the 1st menu page and selecting “Contacts” and then “Add new contact”. You may also add ringtones, videos's , and picturesfor each particular person. However, you can only do so for numbers you save in the phone memory and not your sim card. Phone book entries saved in SIM cards are limited to name and number.

Touchscreen - USE THE “-” buttons directly under the touchscreen for bottom MENU ITEMS
Touchscreens lose their sensitivity from time to time and need to be re-calibrated. If you're unhappy with how the touchscreen responds to your fingers you may hoave to calibrate several times till you get it right. To do this, go to the main menu and choose “Settings” and then choose “Pen calibration.

Shining Light Setting
This phone has the ability to have lights shining and flashing throughout the phone while you're using it. You can adjust or turn off this setting by going to the main menu and choosing “Settings”. From there, go to “Phone setup” and then to “Shining Light Setting”.

How to use Bluetooth
You must first go to the main menu page and then to “Organizer” icon. From here, go to “Extra” and then choose “Bluetooth”. You then want to make sure that the 1st option for “Power” is turned on. After this, go to “My device” and choose “Inquiry new device” ,  in order for the phone to find & recognize your bluetooth set, please make sure it is turned on and right by the phone.

Speed Dial
You need to scroll to the main menu page and choose “Call Center”. From here, choose “Call settings” and option #3  for “Speed Dial” and then enable it. You then want to go to “Set number” and select the number you want and the contact you want that number assigned to – make sure to click “Ok” to save it. Now whenever you want to speed dial that person, all you need to do is bring up the dialer and then press & hold down the number you selected for that person.

How to Adjust the Auto Keypad lock
You can adjust the keypad lock by going to the main menu and choosing “Settings”. From here, go to “Security Setup” and choose “Auto Keypad Lock”.

How to Restore Factory Settings
If you ever want to restore the original settings of the phone, you can do so by going to the main menu page and  then “Settings”. From here, choose “Restore factory settings” - the factory pin code is 1122. Please only do this in an emergency.

How to Access Voice mail & Keypad
To get to your voice mail, you need go to the 1st menu page and choose “Messages”. You then want to choose the voice mail server icon and connect to it. Once you connect, there will be a little yellow phonebook  icon in the bottom middle of the touchscreen – press it and will bring up the touchscreen keypad.

FM Radio
Simply hit the “FM” button to bring up the radio. Make sure your earbuds are plugged in, that is your antenna.

Camera
To access the camera, go to the main menu and choose “Multimedia”, then go to “Camera”. To take a picture, touch the camera icon located in the bottom center of the screen. Select “options” in the bottom left corner of the screen to adjust the camera and access different settings.

View Images
To access the photos you've taken on the camera, go to the main menu and choose “Multimedia”. From her, go to the “Image Viewer”.

How to set phone to "vibrate" and other profile options
To change how your phone will sound when someone calls you, you need change the user profile. To do this, go to te menu page and choose “Settings”, from there open up the "Profiles" icon. In the user profile's menu you can choose from these following options for how the phone will react to both text messages and phone calls:


General - phone will ring at a normal volume
Meeting - when a call or text message is being received, the phone will vibrate instead of ring.
Outdoor - phone will repeatedly ring and vibrate very loud
Indoor - phone will ring/react to text messages with a slightly lower ring volume
Headset - incoming calls will come through the earbuds/headset
Bluetooth - incoming calls will come through your bluetooth device
Make sure to click the setting that you want and then “activate” the profile. If you'd like, can also customize it first by choosing the 2nd option for “Customize”. In the customize menu, you can adjust the:
1.Tone setup
2.Volume

3.Alert type
4.Ring type
5.Extra Tone
6.Answer mode
How to adjust all types of "Tones" on your phone
To get to the "Tone setup" menu, you need to follow the previous directions to go the customize menu for the profiles. Once you're there, choose the 1st option for “Tone setup”
1. SIM1 incoming call - the ringtone or sound the phone will play for SIM1 when a call is received
2. SIM2 incoming call - the ringtone or sound the phone will play for SIM2 when a call is received
3. Power on - tone the phone will make when powering on
4. Power off - tone the phone will make when powering off
5. SIM1 message tone - tone that will be made when message is received for SIM1
6. SIM2 message tone - tone that will be made when message is received for SIM2
7. Keypad tone - the tone that the phone will make when scrolling through the phone

How to change Ring Tones
A simple task like changing a ringtone on a phone can be hard to find on the phone's menu.
Here are the steps to change them with some other bundled or with the ones you download or even
with a full MP3 song.
Go to the main menu and choose “Settings”
* User Profile
Here select the one you use and then choose Customize
* Tone Setup
* Incoming call
Here you can pick one (from 1 to 25 are predefined on the phone) or add one in the 26 to 30 slots.
If you choose to add one click the slot desired (26 to 30) and then click OK.
* Replace
Here it shows the memory card
Go to 'My music' folder or wherever you have the sounds you like
Choose the ringtone or MP3 you like and then click OK
Now you have the sound you want for the ringtone.
Many people asked and as far as I know there is no way to add more than five custom songs or
ringtones because the only slots left are the 26 to 30 and the 1 to 25 doesn't presently permit to change them.
We'll have to wait for a way to update the firmware for that to happen.

How to add music, videos, and wallpaper to your phone:
The first step is to connect your phone to a computer using the USB cable provided. Once you connect it, click the "Mass storage" icon on your phone. Once it has loaded on your computer, open up removable drive folder that will be in "My Computer". From here, you have access to all the different folders to upload whatever you like to your phone - simply "drag and drop" whatever you want.

To upload pictures: add pictures to the "Photos" folder
To upload videos: add videos to the "Videos" folder
To upload music: add music to the "My Music" folder
To upload e-books: add e-books to the "E-book" folder
*please note that you may add your files to any of the folder you want, the above directions are recommend to keep things organized

How to Organize Play list in Audio Player on Phone

When you try to play MP3 files on the Media Player of this phone something odd happens.
If you put a folder inside the "my music" folder (in some models is just "music") it's not showed on the list and the "Auto gen" doesn't recognize it. The only songs added to the list were the ones in the folder 'my music' (or 'music'). It's not reading sub-folders.

There is a 'trick' or more accurate, a hidden option.
If you deactivate the "List Auto Gen' option

'Main Menu
''Multimedia
'Audio Player'
'LIST'
'Option'
'Settings'
'List Auto Gen' ---> Change to 'OFF'
Ok

Now when you go to 'Audio Player' - 'List' – 'Option' . There's a new menu and the option 4 (Add) appears and let you select a folder to add to the play list.

We just need to copy folders of MP3 to the memory card on the phone and add them to the play list as told.
We can have some order now in our MP3 collection inside the phone.


How to Change the wallpaper and other displays on the phone:
The wallpaper is the background displayed on your phone. To change it, we need to first access the 4th menu page.
From here, go to "Phone setup" and then select option 5 for "Display characteristics" and choose option 1 ("Wallpaper")
You've got two options now; you can either choose one of the system wallpapers with the option 1 or select the option 2 ("User Define") and enter the memory card.
In the folder "Images", there are some pre-charged images that come with the phone. You can also upload your own pictures to this folder to have your own customized background. The most desirable picture size is 240x320.
In the display characteristics menu, you can also adjust:

Screen saver – You can adjust the settings for if you want the screen saver on or off as well as how long for it to wait before it comes in. You can also adjust what image you want as the screen saver.
Power on display – choose the picture to be displayed when powering on
Power off display – choose the picture to be displayed when powering off
Show date & time – choose whether you want the date & time to be shown or not
Capacity Style -